Saturday, September 05, 2009

Tutorial: Butterfly Mobile (Suncatcher)

This tutorial will explain to you, step-by-step, how to create the butterfly suncatcher mobile. You may choose to only make the suncatchers and dangle them from a suction hook in your window or dangle them from a curtain rod instead of using an embroidery hoop.

Photobucket

Supplies:
(4) 4” x 12” Strips of Patterned Paper
(4) Chipboard Butterfly Set (Maya Road)
Transparency
Heavy Gauge Wire
Lotus 12x12 Die Cut Butterfly Sheet (Amy Butler for K&Co.)
Boho Buzz Stamp Set (Technique Tuesday)
Staz-On Jet Black Ink Pad
Rhinestones
Emery Board or Sand Paper
4 – 12” cuts of Assorted Ribbon
Coordinating Buttons
Icecicle Stickles (Ranger)
Small embroidery hoop

Tools Needed:

Adhesive
Gluedots
3-D foam dots
Scissors
Pen
Hand-held hole punch

Instructions:
1. Trace chipboard butterfly, TWICE, onto 4 different patterned papers. Cut out.

2. Adhere patterned papers to one side of the chipboard butterflies. Sand edges with emery board or sand paper. Then, using the hole in the chipboard as a guideline, punch a hole through the paper with your hand-held hole punch.

3. Cover the other side of the chipboard butterflies with the same patterns. Sand edges and punch hole.
Photobucket

4. Stamp 8 butterfly images onto a transparency using Staz-on ink. Be sure to leave about ½” between the butterflies to allow room to cut them out. Cut out all 8 butterflies about ¼” from the stamped image.
Photobucket

5. If you want extra sparkle, now is the time to add it! Using your Stickles, add some dots of glitter over the stamped dots on the butterfly wings. Set aside to dry completely before moving on.

6. Once dry, fold each butterfly in half and crease along the center of the body.
Photobucket

7. Adhere the center of the body only to the center of your chipboard butterfly using a single gluedot. You will adhere two butterflies to each chipboard butterfly----one to the front and one to the back.
Photobucket

8. To give the wings lift and dimension, adhere a single small black foam dot, under each wing, as close to the center body as you can.

Photobucket

Photobucket

9. Punch out 8 die-cut butterflies, two for each chipboard butterfly---one for the front and one for the back. Adhere using gluedots.

Photobucket

Photobucket

10. Glitz up the center of the butterflies by adding rhinestones.

Photobucket

11. Embellish them further by cutting 12” of heavy gauge wire. Fold wire in half, then starting approx 2” up from the fold, wrap each stem several times around a pencil to create the butterfly antennae.

Photobucket

Photobucket

12. Attach antennae to only one side of the butterfly, using gluedots. Do this by lifting the transparency and tucking the folded portion in and under.

Photobucket

13. Knot one end of the ribbon through the hole in the upper corner of each butterfly wing. Pretty up the knot by adding a smaller bow from the same ribbon, or a flower.

Photobucket

14. Knot the other end of the ribbon onto the embroidery hoop.

Photobucket

15. Add additional butterflies to the hoop.

16. In the space between where the butterflies are tied, tie one end of 4 additional ribbons to the hoop. Gather those four ribbons upward, and knot them together to make a hanger for your mobile.

17. I dangled an additional glittered butterfly that I found at my local dollar store from the center of my mobile. This is optional.

Photobucket

18. Add decorative elements to cover the hoop and make it more pleasing to the eye. I chose to layer buttons, but flowers would work just as well.

Photobucket

Photobucket

Photobucket

Photobucket


Photobucket

9 comments:

  1. Hi Tania,
    Great tutorial!

    Thanks for sharing

    ReplyDelete
  2. Such a cute mobile!!! Thanks for sharing your great tutorial!

    ReplyDelete
  3. amazing Tania, just amazing.

    ReplyDelete
  4. super CUTE!!! CUTE!!! CUTE!!!

    ReplyDelete
  5. Another great tutorial! Thanks. :o)

    ReplyDelete
  6. I know this was posted a while back, but I just came across it today.
    Wow, what a great idea! You've given me some ideas for cards too.
    Thanks!
    ; )

    ReplyDelete
  7. So cute! I love how it colors are sophisticated and the patterns work. For your next project how about some wind spinners for inspiration?

    ReplyDelete
  8. Great tutorial.

    Val
    www.crieartezzanato.blogspot.com

    ReplyDelete

thank you for taking time to connect with me in this space! i will do my best to leave comments answering any questions you may ask. if you are commenting on an older post and you dont see your comment publish right away it is because I have comments set to be approved before publishing on any blog posts older than 10 days old due to a recent influx of comment spammers. i will see your comment, approve it and reply to you....if it isnt spam. xoxo :)

LinkWithin

Related Posts with Thumbnails